Skip to main content

Installing Rear Clutch Spring: A Technical Guide

Rear Clutch Maintenance for XR/CRF100-80, Pitster Pro GPX125, and ZS 140-155-170, Piranha YX 125-160

Step-by-Step Guide​

  1. Removing the Clutch Springs:

    • Carefully unscrew the four bolts securing the clutch springs. Employ a cross pattern technique, akin to changing a car tire, to prevent any potential damage to the clutch plates.

  2. Reinstallation Process:

    • Reverse the aforementioned procedure during reinstallation. Ensure the bolts are fully inserted.

  3. Securing the Bolts:

    • Use a 1/4 drive ratchet or a nut driver tool of maximum size to gently tighten the bolts. This precaution helps in avoiding any breakage of the bolts and the towers.