9 docs tagged with "clutch"

Clutch Installation and Adjustment Guide

Loosen the locknut on the clutch adjuster screw. Proceed to tighten the screw until there is minimal to no play in the clutch actuator plate. Attach the provided clutch cable to the clutch arm and guide the cable up to the clutch lever. Ensure that there is a slight amount of play at the clutch lever. If this is not the case, loosen the clutch adjuster locknut and readjust the clutch adjuster screw.

1. Loosen the lock nut and turn the adjustment screw to the right by approximately 1 turn. Then, turn the screw to the left until it becomes slightly heavy. Turn the screw back to the right 1/8-1/4 turns from the position where the screw became heavy.

Procedure

1. Remove foot pegs.

Introduction

Rear Clutch Maintenance for XR/CRF100-80, Pitster Pro GPX125, and ZS 140-155-170, Piranha YX 125-160

Leading manufacturers of pit bike tuning kits also offer clutch tuning sets.

A loose shift star and drum can lead to missed gear shifts. Although this is an uncommon issue, it is typically straightforward to resolve.